FM-MP3 evo

Heavy Duty Three Segments Through Anchor

The FM-MP3 evo is an anchor made of galvanised steel, which is placed into a drilled hole and anchored by torque-controlled expansion.

Technický list

Označení CE

ETA

Elektroizolační ocel

Uvnitř

Feu R 120

Fix Calc

Podrobnosti produktu

Obrázky

Vlastnosti

Material

Steel
White zinc plated

Benefits

Universal metallic anchor even for hollow base materials
Single shell body with exclusive cone containing system
Accessories for all types of fixing requirements
Fire resistance R120

Aplikace

Applications

Safety barriers
Fencing
Railings

Suitable for

Multiple use for non-structural applications on cracked and non-cracked concrete

Technické údaje

Rozměry

Product Dimensions Anchor Only

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Max. fixture thickness [t_fix] [mm]	Hole diameter [d_o] [mm]	Min. hole depth [h₁] [mm]	Nominal embedment depth [h_nom] [mm]	Min. setting depth [h_ef] [mm]	Hole diameter in fixing element [d_f] [mm]	Min. fixture thickness [h_min] [mm]	Torque [T_inst] [Nm]	Qty per box	Qty per outer box
73300B1004500	FM-MP3 evo	M6x45*	-	10	60	45	36	8	100	8	50	500
73300B1205000		M8x50*	-	12	70	50	43	10	100	15	50	500
73300B1506000		M10x60*	-	15	80	60	50	12	100	30	25	250
73300B1808000		M12x80*	-	18	100	80	69	14	140	50	20	200

*Certified product when coupled with hex head screw DIN933 grade 8.8 and washer DIN125-1 (t_fix = L_v – h_nom)

Product Dimensions Hex Head Screw

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Max. fixture thickness [t_fix] [mm]	Hole diameter [d_o] [mm]	Min. hole depth [h₁] [mm]	Nominal embedment depth [h_nom] [mm]	Min. setting depth [h_ef] [mm]	Hole diameter in fixing element [d_f] [mm]	Min. fixture thickness [h_min] [mm]	Thread length [L_v] [mm]	Torque [T_inst] [Nm]	Qty per box	Qty per outer box
73301B1004500	FM-MP3 evo	M6x45	5	10	60	45	36	8	100	50	8	50	500
73301B1205000		M8x50	10	12	70	50	43	10	100	60	15	50	250
73301B1506000		M10x60	20	15	80	60	50	12	100	80	30	25	125
73301B1808000		M12x80	20	18	100	80	69	14	140	100	50	20	100

** Not covered by CE certification

Product Dimensions Forged Cup Hook

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Hole diameter [d_o] [mm]	Min. hole depth [h₁] [mm]	Nominal embedment depth [h_nom] [mm]	Min. setting depth [h_ef] [mm]	Min. fixture thickness [h_min] [mm]	Thread length [L_v] [mm]	Internal Ø hook or eye [O] [mm]	Torque [T_inst] [Nm]	Qty per box	Qty per outer box
73303B1004500	FM-MP3 evo	M6x45**	10	60	45	36	100	50	9.5	5	50	500
73303B1205000		M8x50**	12	70	50	43	100	60	11	10	50	250
73303B1506000		M10x60**	15	80	60	50	100	73	14	20	25	125
73303B1808000		M12x80**	18	100	80	69	140	90	16	30	20	80

**Not covered by CE certification

Product Dimensions Forged Eye

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Hole diameter [d_o] [mm]	Min. hole depth [h₁] [mm]	Nominal embedment depth [h_nom] [mm]	Min. setting depth [h_ef] [mm]	Min. fixture thickness [h_min] [mm]	Thread length [L_v] [mm]	Internal Ø hook or eye [O] [mm]	Torque [T_inst] [Nm]	Qty per box	Qty per outer box
73304B1004500	FM-MP3 evo	M6x45**	10	60	45	36	100	50	10	5	50	500
73304B1205000		M8x50**	12	70	50	43	100	60	11.5	10	50	250
73304B1506000		M10x60**	15	80	60	50	100	73	14.5	20	25	125
73304B1808000		M12x80**	18	100	80	69	140	90	17	30	20	80

**Not covered by CE certification

Recommended loads / for single anchors / with no edge distances or spacings - ETA-09/0067

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Design capacity - Non-cracked concrete (3)
			Tension - N_rec1)				Shear - V_rec (1-2)				Bending moment MRd [Nm]
			C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	C20/25 [kN]	C30/37 [kN]	C40/50 [kN]	C50/60 [kN]	Bending moment MRd [Nm]
73300B1004500	FM-MP3 evo	M6x45*	3.6	4.4	5.1	5.6	3.7	3.7	3.7	3.7	7
73300B1205000	FM-MP3 evo	M8x50*	5.7	7	8	8.8	6.8	8.2	8.2	8.2	17
73300B1506000	FM-MP3 evo	M10x60*	8.3	10.4	12	13.2	8.5	10.3	12	13.2	34
73300B1808000	FM-MP3 evo	M12x80*	11.9	14.5	16.8	18.4	19.3	19.3	19.3	19.3	60

1. The recommended loads have been calculated using the partial safety factors for resistances stated in ETA-approval(s) and with a partial safety factor for actions of γF=1.4. The loading figures
are valid for unreinforced concrete and reinforced concrete with a rebar spacing s ≥ 15 cm (any diameter) or with a rebar spacing s ≥ 10 cm, if the rebar diameter is 10 mm or smaller.
2. The figures for shear are based on a single anchor without influence of concrete edges. For anchorages close to edges (c ≤ max [10 hef; 60d]) the concrete edge failure shall be checked per
ETAG 001, Annex C, design method A.
3. Concrete is considered non-cracked when the tensile stress within the concrete is\sigmaL +\sigmaR ≤ 0. In the absence of detailed verification\sigmaR = 3 N/mm² can be assumed (\sigmaL equals the tensile
stress within the concrete induced by external loads, anchors loads included).

* The above load values also apply to: evo S

Recommended loads / for single anchors / with no edge distances or spacings - ETA-10/0074

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Design capacity - cracked and Non-cracked concrete
Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Tension and Shear - F_rec [kN] - C20/25-C50/60
73300B1004500	FM-MP3 evo	M6x45*	2.9
73300B1205000	FM-MP3 evo	M8x50*	5.7
73300B1506000	FM-MP3 evo	M10x60*	7.6
73300B1808000	FM-MP3 evo	M12x80*	9.5

1. The recommended loads have been calculated using the partial safety factors for resistances stated in ETA-approval(s) and with a partial safety factor for actions of γF=1.4. The loading figures
are valid for unreinforced concrete and reinforced concrete with a rebar spacing s ≥ 15 cm (any diameter) or with a rebar spacing s ≥ 10 cm, if the rebar diameter is 10 mm or smaller.
2. The figures for shear are based on a single anchor without influence of concrete edges. For anchorages close to edges (c ≤ max [10 hef; 60d]) the concrete edge failure shall be checked per
ETAG 001, Annex C, design method A.
3. Concrete is considered non-cracked when the tensile stress within the concrete is\sigmaL +\sigmaR ≤ 0. In the absence of detailed verification\sigmaR = 3 N/mm² can be assumed (\sigmaL equals the tensile stress within the concrete induced by external loads, anchors loads included).

* The above load values also apply to: evo S

Instalace

Spacings and edge distances - ETA-09/0067

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Min. edge distance [cmin] [mm]	Min. spacing [smin] [mm]	Characteristic edge distance [ccr,N] [mm]	Characteristic spacing(5) - Scr,N [scr,N] [mm]
73300B1004500	FM-MP3 evo	M6x45*	35	35	54	108
73300B1205000	FM-MP3 evo	M8x50*	45	45	65	130
73300B1506000	FM-MP3 evo	M10x60*	50	50	75	150
73300B1808000	FM-MP3 evo	M12x80*	75	75	104	208

* The above table values also apply to: evo S

Spacings and edge distances - ETA-10/0074

Art. nr.	Product Reference	Dimensions [ØxL] [mm]	Characteristic spacing(5) - Scr,N [scr,N] [mm]	Characteristic edge distance [ccr,N] [mm]	Min. edge distance [cmin] [mm]	Min. spacing [smin] [mm]
73300B1004500	FM-MP3 evo	M6x45*	35	35	200	100
73300B1205000	FM-MP3 evo	M8x50*	45	45	200	130
73300B1506000	FM-MP3 evo	M10x60*	50	50	200	150
73300B1808000	FM-MP3 evo	M12x80*	75	75	200	210

* The above table values also apply to: evo S

Vyberte jednu z našich stránek

Tesařské kování

Premium Fasteners

Chemické a ocelové kotvy

Quik Drive® Systém

Podrobnosti produktu

Obrázky

Vlastnosti

Material

Benefits

Aplikace

Applications

Suitable for

Technické údaje

Rozměry

Product Dimensions Anchor Only

Product Dimensions Hex Head Screw

Product Dimensions Forged Cup Hook

Product Dimensions Forged Eye

Recommended loads / for single anchors / with no edge distances or spacings - ETA-09/0067

Recommended loads / for single anchors / with no edge distances or spacings - ETA-10/0074

Instalace

Instalace

Spacings and edge distances - ETA-09/0067

Spacings and edge distances - ETA-10/0074

Certifikace

Prohlášení o funkčnosti (DoP)

Evropské technické posouzení (ETA)

O nás Simpson Strong-Tie®

Simpson Strong-Tie Německo

Phone

Email

Website

Copyright (cs-CZ)